Where graphics meets gaming.

    How to iso mod CodWaW - Tutorial


    Posts : 49
    Join date : 2011-06-01
    Age : 23
    Location : essex

    How to iso mod CodWaW - Tutorial

    Post  Volcano on Wed Jun 01, 2011 10:02 pm

    1. You will need DVD+DL 8.5GB Disks (dl means Dual layer/Double Layer) And they need to be atleast 2X Speed.

    The best Brands are Memorex and Verbatim

    2. Download some tools

    megaupload.com QBITZ9JM - Updated link to include the setup.exe for abgx360

    3. You will need to download a call of duty World at War iso. and some modded files

    I will not link to a download because it is illegal and it considered warez

    Make sure that the iso is for your region
    Pal = England/Australia
    NTSC = America
    Region Free = Everyone ~ Recommended.

    Now you will need to download the modded files for CodWaW Zombies

    3.5. Download some modded files for Call of duty World at War
    (You can find these in this forum)

    4. One you have the modded files and the CodWaW .iso you can continue.

    Open abgx360 GUI
    Go to the 'autofix' Tab

    Make your settings as mine are.

    Go to "misc' Tab and Press select where is says "Choose your console's region code.
    Tick the corrent box and press OK

    Now make the rest of the settings like mine.

    Go to the 'Option' tab and make your settings like mine.

    Go to File > Save settings... and save the settings. Load these settings everytime you use abgx360.

    Now go to File > Open input and open the CodWaW .Iso
    Press Launch, located at the bottom of the program and it will start checking your iso for errors. Wait until it says press any key to exit..

    If everything is green, that means you have a working .iso
    If certain things are red, than this means your .iso is bad and you will need to re download a new one.

    5. Open wx360. Go to file > Open. Open your iso for CodWaW
    When opened it will look like this.

    Now this is very important, Go down until you see default.xex, Right click and extract to desktop.

    Go up to Code_Post_Gfx.ff and replace with the modded file you downloaded.
    Go down to Common.ff and replace with the modded file you downloaded
    Go down to nazi_zombie_prototype.ff and replace with the modded file you downloaded.

    Wait until they are done.

    Replace the default.xex with the one you extracted to the desktop
    (we do this because when you replace the other files with the modded one the default.xex gets corrupted. So we replace it after with the uncorrupted one.)

    Exit out of wx360

    6. Open ImgBurn
    Go to Tools > Settings > Write tab

    Copy the following settings.

    Press Ok

    Now press write Image File to disk

    Choose your speed for burning (I suggest 2.4 or 2 for it to properly burn without any mistakes

    Go to open file.. You should of noticed the .dvd file that you have

    IMPORTANT: Make sure you open the .dvd file. NOT the .iso file.

    ImgBurn should look like this.

    Now burn the disk

    After a while it will pop-up with something that says "Failed to close dvd tray, close the tray and press ok"
    Close the tray and press OK.

    It will verify your disk.

    Wait until this is done then you will hear a nice little jingle informing you that your disk is done.

    HotSwapping Video Tutorial

    People who I have helped or who liked this tutorial

    own]Hope i helped some people and if you have any questions you can Private Message me or make a post

    Do not message me asking for the ISO, use pirate bay.

      Current date/time is Fri Jan 18, 2019 9:24 am